14ENGLISH
head assembly symbol and faucet symbol with exclamation mark remain on the display, immediately replace the Razor Head Assembly (see ‘Replacing Razor Head Assembly’).
Charge Meter
◗Charge Meter monitors amount of remaining battery power (Models 1060X and 1059X) and actual shaving minutes (Model 1090X) available. ‘Minutes Left’ or remaining battery capacity is based on the amount of power consumed shaving per minute and is dependent upon your skin and beard type, whether you use
◗Initially your razor may need to go through 2 or 3 full charge/recharge cycles before ‘Minutes Left’ (Model 1090X) or remaining battery capacity indicators (Models 1060X and 1059X) begins to display your accurate shaving minutes left.
Before First Use
◗Charge the razor before you start using it (see ‘Charging’). Make sure the razor is switched off before you start charging it.
◗Remove any sticker or protective foil from the Display before using razor.
ENGLISH 15
Important
◗Only use the power cord and charging stand or power pod provided to charge
the razor.
◗The power plug transforms
◗Do not attempt to disassemble the Razor Head Assembly to individually clean each cutter and comb. The individual shaving heads are not removable.
Travel Lock
The razor is equipped with a travel lock function. You can use the travel lock function when you are going to store the razor for a longer period or if you are going to take the razor with you when traveling. See ‘Travel Lock’ section for instructions on how to use this function.
Charging
◗Charging or recharging at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of batteries.
◗Always unplug this charging stand/pod from the electrical outlet immediately after use, except when razor is (re)charging.You can store the razor in the charging stand or power pod.
◗Charging or recharging requires one full hour.
