Replacing Razor Head Assembly, Maintenance

C 3 Clean the trimmer with the short-bristled side of the brush supplied. Brush up and down along the trimmer teeth.

4Turn the trimmer ON and OFF. Repeat step 3.

5 Lubricate trimmer teeth twice a year with one drop of mineral oil.

C 6 Push the trimmer slide switch backward to retract the trimmer.

Replacing Razor Head Assembly

◗Replace the entire Razor Head Assembly once a year for optimal shaving results.

◗Replace damaged or worn Razor Head Assembly with model RQ10 Philips Norelco razor heads only.

◗The individual shaving heads (cutters and combs) are NOT removable/replaceable. Only the one-piece Razor Head Assembly can be replaced.

C ◗ The replacement head indicator symbol starts blinking (model 1090X only, you will also hear a beep) to remind you to check if it’s time to

	ENGLISH 27
	replace your Razor Head Assembly to obtain
	optimal shaving results.
C	1 Remove the Razor Head Assembly from
	the razor by pulling the Razor Head
	Assembly straight up away from the razor.

C	2 Place new Razor Head Assembly back on
	the razor and push down (you will hear a
	click).
	The Razor Head Assembly will only fit correctly
	in one position on razor. Make sure to align the
	raised notch on the Razor Head Assembly (1)
	with the slot inside the top of razor (2).
	This razor and charging stand/power pod have no
	other user-serviceable parts. For assistance call
	1-800-243-3050.

◗Always remove razor from the charging stand/ power pod before cleaning appliance.

◗Unplug the charging stand/power pod after charging/recharging razor.The charging stand/ power pod and razor may be wiped clean using a damp cloth.

◗Water from the tap should be on a warm setting to clean any washable parts.

Note: DO NOT place or clean any parts of the charging stand/power pod in a dishwasher.