Philips 107E69 manual Video cable

Video cable

Connecting the Video Cable: The monitor comes with a built-in video cable. Plug the signal cable's 15-pin connector into the computer's video port and tighten the two screws on the cable connector.

Caution:Don’t bend the signal cable, otherwise it will break the inner wire.

Connecting the Power Cord: Plug the power cord into the monitor's AC power socket. Then plug the power cord into a grounded AC outlet or UL- approved power strip or the power output socket on your PC.

Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

Figure 2 Connecting Cables

1.

Power Cord

2.

Signal Cable

4