32ENGLISH
C4 Lift the retaining frame out of the shaving head holder.
ENGLISH 33
C10 Place the retaining frame back onto the shaving head holder.
C 5 Remove the cutter from the comb. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally put a cutter in the wrong comb, it may take several weeks before optimal shaving performance is restored.
C 6 Clean the cutter with the cleaning brush supplied.
C 11 |
C 12 |
Slide the retaining frame back into place (‘click’).
Reattach the shaving head holder to the bottom part of the shaving unit.
C 7 | Clean the inside of the comb. |
C 8 | After cleaning, place the cutter back into |
| the comb with the cutter legs pointing |
| downwards. |
9 | Repeat the process for the other two |
| cutters and combs. |
Cleaning the Trimmer
Clean the trimmer after each use.
1Turn razor ON with trimmer attached to razor.
C F C 2 Rinse the trimmer under hot water. BUT BE CAREFUL TO TEST WATER FIRST SO 
AS NOT TO BURN OR SCALD HANDS.
3 Remove trimmer from razor and allow to air dry.
Tip: For optional trimmer performance, lubricate the trimmer teeth with one drop of mineral oil every 6 months.
