Philips 1160X manual Before First Use, Charge Meter, Travel Lock, Remaining Battery Capacity Model

14ENGLISH

C

◗Remaining Battery Capacity Model 1180X

-The remaining battery capacity is indicated by the number of charging lights that are on.

ENGLISH 15

◗Initially your razor may need to go through 2 or 3 full charge/recharge cycles before remaining battery capacity indicators begin to display your accurate battery power left.

Before First Use

◗ Low Battery Indicator

C Model 1180X

-When the battery is almost empty (5 or less

shaving minutes left), the bottom charging light blinks orange. When you turn the razor OFF the bottom charging light continues to blink for a few seconds.

C Models 1160X, 1160XCC and 1150X -When the battery is almost empty (5 or less shaving minutes left), the plug symbol blinks. When you turn the razor OFF the plug symbol blinks for a few seconds.

NOTE:The displays of models 1160X, 1160XCC and 1150X look different, but work the same way.

Charge Meter (1180X)

◗Charge Meter monitors amount of remaining battery power available. Remaining battery capacity is based on the amount of power consumed shaving per minute and is dependent upon your skin and beard type, whether you use pre-shave lotion, and how often the trimmer is used.

◗Charge the razor before you start using it (see ‘Charging’). Make sure the razor is switched off before you start charging it.

◗Remove any sticker or protective foil from the Display before using razor.

Important

◗Only use the power cord and charging stand or Jet Clean System (model 1160XCC only) provided to charge the razor.

◗The power plug transforms 100-240V AC to less than 24V DC.

Travel Lock

The razor is equipped with a travel lock function. You can use the travel lock function when you are going to store the razor for a longer period or if you are going to take the razor with you when traveling. See ‘Travel Lock’ section for instructions on how to use this function.