24ENGLISH
2The lock symbol goes out and the razor turns ON to indicate that the razor has been unlocked.The razor is now ready for use.
BThe razor unlocks automatically when charging in the charging stand or Jet Clean System.
Cleaning
ENGLISH 25
◗Regular cleaning guarantees better shaving results.
◗While rinsing razor heads, water may drip out of the base of razor. This is a normal occurrence.
1Always turn razor OFF, remove from charging stand/Jet Clean System before cleaning.
◗Always clean your razor after each use.
◗Regular cleaning guarantees better shaving results.
◗Never clean, remove or replace shaving unit while motor is on.
◗Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage
◗Do not use razor if combs are damaged or broken. Facial injury may occur.
◗Do not use abrasives, scourers or aggresive liquids such as gasoline or acetone to clean the razor or Jet Clean System.
C F C
C
2Rinse the shaving unit by running under hot water for a few minutes.
BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.
3Pull the shaving head holder off the bottom part of the shaving unit and rinse under hot water for 30 seconds.
4Carefully shake off excess water and let the shaving unit air dry.
Cleaning the Shaving Unit
The razor heads may be quickly cleaned after each use by rinsing with hot water. Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.
NOTE: Do not wipe or dry the shaving unit with a towel or tissue.This could damage the shaving heads.
C 5 | Push the shaving head holder back onto |
| the bottom of the shaving unit. |
6 | You may also clean the shaving unit and |
| hair chamber without water by using the |
| supplied brush. |
