8
Child lock
1Press the MENU button.
2Select and confirm the ’FEATURES’ line.
3Select the ’CHILD LOCK’ line.
4Switch the child lock on or off.
5Press the MENU button.
Note: If a button is pressed with the childlock ’on’,
’CHILD LOCK’ appears for a few seconds in the display.
* Programmed recordingsare made despite the child
lock and cannot be interrupted.
Manual channel search
In certain cases the AutomaticChannel Search may not be
ableto find all of the TV channels (e.g.: coded TV channels).
You can then use this manual method to set the channels.
1Switch on the set with the STOPhbutton. Press the
Dbutton and the Cbuttonsimultaniously.
2Select and confirm the ’MANUAL STORE’ line.
MANUALSTORE vw
CHANNEL/FREQ.
SYSTEM EUR
SEARCH C-21
FINETUNING
PROGRAMMENR. 1
DECODER
STORE
3Select the ’SEARCH’ line.
4Press the Cbuttonas often as necessary, until you
have found the right TV channel.
Note:
* If you want to allocate a decoder, switch the decoder
function on or off with the Dor Cbutton in the
’DECODER’ line.
* If you want to change the automatic channel setting,
select the ’FINE TUNING’ line.
With the Dor Cbuttonyou can vary the auto-
matic TV channel setting.
Important: This re-tuning is only necessaryand useful in
special cases, e.g.: when there are stripes on the
picture with cable-TV systems.
5In the ’PROGRAMME NR.’ line use the Ppbuttonto
select the required programmenumber, e.g.: ’P 01’.
6Select and confirm the ’STORE’ line.
7If you want to search for further TV channels, start again
at step 4.
To finish, press the MENU button twice.