Switching the On-screen display (OSD) onor off
You can switch the On Screen Display of the current operating
information on or off.
aPress the MENU button. The main menu appears.
bSelect the line ’Setup’ with the menu buttons
PrB or APqand confirm with the SqC button.
SETUP
Parental control OFF
Display MAX
ã Exit:
« press MENU
cSelect the line ’Display’ with the menu buttons
PrB or APq.
dSelect one of the options indicated with the menu buttons
SqC or DSr .
’MAX’: The OSD appears for a few secondseach time an
operating mode is selected and then disappears.
’MIN’: The OSD is reduced to a minimum.
’PROGR.’: The programme number is always shown.
’COUNTER’: The tape position is always shown.
eConfirm with the OK button.
fTo end, press the MENU button.
DWith the OK button you can superimpose the On
Screen Display of current operating mode on the TV
screen.
Continuous playback
You can automatically play a cassette again and again. When
the end of the tape or the recording has been reached, it will
rewind and start again.
aPress the MENU button. The main menu appears.
bSelect the line ’Tape’ with the menu buttons PrB or
APq. Confirm with the menu buton SqC .
TAPE
Tape speed SP
Repeat play OFF
Jitter N. ACT.
Tracking (,,,,,,=,,,,,$
Cleaning N. ACT.
ã Exit:
« press MENU
cSelect the line ’Repeat play’ with the menu buttons
PrB or APq.
dSelect ’ON’ with the menu buttons DSr or
SqC . If you select ’OFF’, the function will be
switched off.
eConfirm with the OK button.
fPress the MENU button.
19