Philips 150B4CB, 150B4CG, 150B4CS Horizontal flicker appears, The screen is too bright or too dark

Troubleshooting

Horizontal flicker appears

● Press the Auto button.

● Eliminate the horizontal bars using the Phase

Adjustment of VIDEO NOISE in OSD Main

Controls.

The screen is too bright or too dark

An after-image appears

An after-image remains after the power has been turned off.

Green, red, blue, dark and white dots remain

●Adjust the contrast and brightness in OSD Main Controls. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.

●If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an after-image. This usually disappears after a few hours

●This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The after-image will disappear after a given amount of time

●The remaining dots are normal characteristic of the liquid crystal used in today’s technology.

For further assistance, refer to the Consumer Information Centers list and contact your local Philips

distributor.

RETURN TO TOP OF THE PAGE

file:///D/B/english/150b4cgbs/safety/saf_troub.htm (3 of 3) [8/27/03 11:37:40 AM]