Philips 150P2M user manual Screen is too bright or too dark

Troubleshooting

The screen is too bright or too dark	● Adjust the contrast and brightness in OSD Main Controls. (The
	backlight of the LCD monitor has a fixed life span. When the screen
	becomes dark or begins to flicker, please contact your dealer.

An after-image appears

An after-image remains after the power has been turned off.

Green, red, blue, dark, and white dots remains

●If an image remains in the screen for an extended period of time, it may be imprinted in the screen and leave an after-image. This usually disappears after a few hours

●This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The after-image will disappear after a set amount of time

●The remaining dots are normal characteristic of the liquid crystal used in today’s technology.

For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor.

RETURN TO TOP OF THE PAGE

file:///D/Grace/150P2/english/150p2m/safety/saf_troub.htm (2 of 2) [9/5/2001 11:09:19 AM]