How to Use the On Screen Display (OSD)
Front Panel Control / Main Menu
Volume
To adjust your monitor’s volume, follow the steps below. The volume control adjusts the sound from the two front-
mounted speakers or the earphones jack.
1 Press the Volume button (first one from the left) on the front of the monitor.
The Volume window appears.
2
Turn the
ROTARY knob (at the lower right- hand corner of the monitor) to adjust the volume.
3
When finished, press the
VOLUME
button again. The Volume screen disappears
.
Smart Help
After Volume Window has disappeared, to continue to the Main Menu, press the larger OSD (On Screen Display) button between the BRIGHTNESS and CONTRAST buttons. Next, follow steps 2 - 3 under MUTE.
If you do not press the VOLUME button a second time, the Volume window will “time out” (disappear) after five seconds. You can change this time. See page 8 for time out options.
Mute
To completely turn off the volume (but still return to the former level), follow the steps below. The mute control turns off the sound from the two
jack. Note: audio is muted from monitor speakers when earphones are connected. See pages 2 and 16 for details.
1 Press the ON SCREEN
DISPLAY button.
The Main Menu appears and the MUTE icon is highlighted. MUTE OFF appears by the icon.
4 |
|
| 2 |
|
|
|
|
|
|
|
| ||
Press | the | ON SCREEN DISPLAY | ||||
To turn the |
| button a second time. MUTE | ||||
mute off, press |
| ON appears by the icon and | ||||
the On Screen |
| EXIT OSD Is highlighted. | ||||
Display button |
|
|
|
| ||
and repeat |
|
|
|
| ||
|
|
|
| |||
steps 2 - 3. |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3Press the ON SCREEN DISPLAY (OSD) button a third time to exit the OSD.
Smart Help
To go to DEGAUSS . . .
. . . instead of pressing the ON SCREEN DISPLAY (OSD) button a third time, turn the ROTARY knob until DEGAUSS is highlighted. Next, press the OSD button. Turn to the next page and follow steps 2 - 3.
. . . once you have exited the OSD, press the OSD button and turn the Rotary knob until DEGAUSS is highlighted. Next, press the OSD button. Turn to the next page and follow steps 2 - 3.
If you do not press the OSD button a third time, the OSD window will “time out” (disappear) after five seconds. You can change this time. See page 8 for time out options.
5
