Geometry Controls window

Pincushion, Balanced Pincushion, Balanced Pincushion,Pincushion,
T
Trrapezoid, apezoid, PPararallelograllelogram, am, RRototaationtion
Follow the steps below to adjust any of the five preset options (PINCUSHION, BALANCED PINCUSHION, TRAPEZOID,
PARALLELOGRAM,or ROTATION).You can make individual adjustments to each of the preset options.
Note: use these
features only when the picture is not square.
Smart Help
To exit GEOMETRYCONTROLS . . .
...but continue to another window,
turn the ROTARYknob until required function is highlighted. Now, press the ONSCREEN DISPLAY button and follow the
instructions for that window.
.. . TO exit completely,
press the ONSCREEN DISPLAYbutton and hold for 1.5 seconds. The On Screen Display will disappear. All changes will be saved.
To make changes to one item,follow the steps for that item. Then, follow
“
To exit GEOMETRYCONTROLS . . . .”
To return to factory presets,see “To Reset an Individual Window” on page 16.
Press the ONSCREEN
DISPLAYbutton.
2b
2b
1
1

2a

2a Turn the ROTARYknob, if necessary,turn
the ROTARYknob until PINCUSHION icon is
highlighted.
Press the ON
SCREEN DISPLAY
button.Then, turn
the ROTARYknob to
adjust the
pincushion.
To select BALANCED
PINCUSHION,turn the
ROTARYknob until
BALANCED PINCUSHION
is highlighted.Next,
press the ONSCREEN
DISPLAYbutton.

4b

4b Turn the ROTARYknob to
adjust the trapezoid.
4c
4c
5a
5a
5c
5c
When done,press
the ONSCREEN
DISPLAYbutton to
save the change
and return to
GEOMETRYCONTROLS
window.
5b
5b
How to Use the On Screen Display (OSD)

8

2c

2c

3a
3a
Turn the ROTARY
knob (on the
lower right-hand
corner of the
monitor) to adjust
the balanced
pincushion.
3b
3b

3c

3c When done,
press the ON
SCREEN DISPLAY
button.This will
save the change
and return the
screen to
GEOMETRY
CONTROLS.
To select TRAPEZOID,
turn the ROTARY
knob until TRAPEZOID
Icon is highlighted.
Next,press the ON
SCREEN DISPLAY
button.
4a
4a
When done,press the
ONSCREEN DISPLAYbutton.
This will save the
change and return the
screen to GEOMETRY
CONTROLS window.
To select PARALLELOGRAMor
ROTATION,turn the ROTARYknob
until PARALLELOGRAMor ROTATION
icon is highlighted.Next,
press the ONSCREEN DISPLAY
button.Then follow steps 4b
and 4c to make the
appropriate changes.