HOW TO BLOCK CHANNELS USING AUTOLOCK™
After your personal access code has been set (see the previous page), you are ready
to select the channels or inputs you want to block out or censor.
1 Press the MENU button on the remote control to show the onscreen menu.
2 Press the CURSOR DOWN button to highlight Features.
3 Press the CURSOR RIGHT button to display the Features menu.
4 Press the CURSOR DOWN button to highlight AutoLock™.
5 Press the CURSOR RIGHT button again display the Acess Code menu prompt.
6 Enter your
7 You can choose to block individual channels or all channels at the same time. For individual channels, press the CURSOR RIGHT to enter the Lock Channel menu.
8 Using the numbered buttons or the CH+ or CH- buttons enter the chan-
nel you wish to lock.
Repeat step 8 for any channels you want to lock.
9
Press the CURSOR RIGHT button to
10select On to activate the blocking of all channels. To deactivate the blocking of all channels, select Off.
Press the STATUS/EXIT button to
11remove the menu from the screen.
NOTE TO PARENTS: It isn’t possible for your child to unblock a channel without knowing your access code or changing it to a new one. If your code has been changed without your knowledge, then you will become aware that blocked channels may have been viewed.
HELPFUL HINT
Remember that 0711 is the default AutoLockTM code. If your access code has been changed by someone other than you (a child, for exam- ple) or you have forgotten the code, you can always get in by inputting the default code.
13
If a channel is blocked by the Block Channel or Block All option, the TV will display the above screen. To watch the chan- nel, enter your access code or you can change the Block Channel option back to Off.
