REMOTE CONTROL ACCESSORY DEVICE RELATED BUTTONS
When using the TV remote with an acces- sory device, first make certain it is set
to control your accessory device (by the REMOTE CODE or SEARCH method).
1 Set the TV/DVD/AUX/ACC select button and select the desired mode.
2 Point the top of the remote toward
POWER BUTTON
Press to turn the accessory device ON and OFF.
RECORD • BUTTON
Hold the VCR • RECORD button down to begin a VCR recording.
REWIND BUTTON
Press to rewind tapes. For some VCR’s the STOP button may have to be pressed first, then REWIND. May be used to scan back through chapters or titles on DVD movies.
STOP BUTTON ■
Press to stop the motion of a tape or to stop the playback of a DVD.
NUMBER BUTTON
Press buttons for direct channel selec- tions. May also be used for direct num- ber entries in certain onscreen menu feature settings.
SELECT BUTTON
Select the correct mode to send remote commands to the accessory device. A light will appear above the selected mode.
PAUSE BUTTON II
Press to temporarily stop the tape dur- ing a playback or recording or pause the playback of a DVD. Press again to release Pause.
FAST FORWARD BUTTON
Press to rapidly advance a tape or DVD. For some accessory devices, you may need to press the STOP but- ton first, then the FAST FORWARD button. In playback mode hold the button down to view the picture mov- ing rapidly in the forward direction.
PLAY BUTTON
Press to begin playback of a video tape, DVD, etc.
CHANNEL + / – BUTTONS
Press to scan up or down through the channel numbers if your accessory device will change channels.
HELPFUL HINT
The buttons on the remote will not operate your accessory device if those features are not found on your accessory’s remote control.
Note: All functions (particularly Search, Rewind, Fast Forward, etc.) will operate the same as with the original remote control pro- vided with your accessory device.
33