HOW TO USE THE SOUND ADJUSTMENT CONTROLS
To adjust your TV sound controls, select a channel and follow these steps.
1 Press the MENU button on the remote control to show the onscreen menu. Picture will be high- lighted.
2
3
4
5
6
Press the CURSOR DOWN button to highlight Sound.
Press the CURSOR RIGHT button to enter the sound menu.
Press the CURSOR UP or CURSOR DOWN button to select the sound adjustment you want to change: Equalizer, Balance, AVL, Dolby Virtual, SAP, or Sound.
Press the CURSOR LEFT or CURSOR RIGHT button to adjust the selected control.
Press the STATUS/EXIT button when finished to remove the menu from the screen.
HELPFUL HINT
Equalizer – adjusts the sound tones. Select 120Hz to 10KHz.
Balance – adjusts the level of sound coming from the left and right speakers.
AVL (Auto Volume Leveler) - when On, AVL will level out the sound being heard when sud- den changes in volume occur during commer- cial breaks or channel changes.
Dolby Virtual - adds greater depth and dimen- sion to TV sound. Select from Dolby Virtual or Stereo sound (if Stereo) or Spatial or Mono (if Mono).
SAP (Secondary Audio Programming)– sent as a third audio channel, a SAP signal can be heard apart from the current TV program sound. Note: If SAP is not available, “Not Available” will appear on the screen.
Sound – select from Stereo or Mono.
9