HOOKING UP THE TELEVISION
4

T

he Monitor (Audio/Video) out jacks are great for recording with a
VCR or used to connect an external audio system for better audio.
ForAudio System Connection:
1Connect one end of the R(ight) and L(eft) AUDIO (Monitor
Out) jacks located on the right rear of the TVto the R and L
audio input jacks on your sound system. Refer to the AUDIO
OUTcontrol within the Directions for Use for FIXED or VARI-
ABLEsettings.
2Turn the TVand audio system ON. TV sound can be heard
through the audio system
For Second VCR Connection/Recorder:
The following steps allow you to connect a VCR to record the pro-
gram while yourwatching it.
3Connect one end of the yellow Video Cableto the Monitor
outVIDEO OUT plug on the left rear of the TV. Connect the
other end to the VIDEOIN plug on the second VCR.
4Connect one end of the red and white Audio cablefrom the
Monitorout Land R plugs on the left rear of the TVto the
AUDIO IN plugs on the VCR.
5Turn the VCR ON,insert a black VHS tape and it’s ready to
record what’s being viewed on the TVscreen.
MONITOR OUTPUTS
PC
Audio
Out
VGA/RGB
Out
1
2
3
4
DVI
This TVcan be used as a PC Monitor. Your computer will have
to be equipped with a VGAtype video output and VGA cable.
1
Connect one end of the VGAVideo cable to the Monitor
(video) output on the computer to the PCInput (VGA) jack
on the bottom of the TV.You can use the DVI cable if your
computer has DVI capability.
2
Although audio connections are not required, the TVcan
reproduce the computers audio out by an AUDIO
ADAPTER to the Audio output jack on the computer (if
available) while connecting the other ends of the Audio
cables to the Audio In left and right (PC/HD) Input Jacks
on the bottom of the TV.
3
Turn the TVand the Computer ON.
4
Press the PC Mode button to set the TVinto the HD
Mode and tune to the computer’s signal.
Note: Please contact your dealer or Philips at 800-531-0039 for
information about purchasing the needed cables.
PC (MONITOR) INPUTS
AUDIO
ADAPTER
VGACABLE
BOTTOM OF TV
DVI CABLE
T
here are Audio/Video Input Jacks located on bottom of the TVcan
also be used for extra accessory device connections for items such
as cameras or gaming stations.
1Connect the VIDEO (yellow) adaptercable to the VIDEO
AV2 injack on the left rear of the TV. Connect the otherend
of the VIDEO (yellow) cable to an RCAtype VIDEO Cable.
Connect that cable to the VDEO OUTjack on the back of the
accessory device being used. Note:An S-Video cable can be
used in place of the yellow Video cable if your device is
equiped with an S-Video Output. S-Video provides better video
playback.
2Connect the AUDIO (red and white) adaptercable to an
RCAtype Audio Cable. Connect the other ends of the
AUDIO (red and white) cablesto the AUDIO (left and right)
OUTjacks on the rear of the accessory device being used.
3Turn the accessory device and the TVON.
4
Press the AV+ button and the number2 button on the
remote control to select the AV2 channel for the accessory
device. AV2 will appear in the upper left corner on the TV
screen when tuned properly. You can also press and hold
the AV+ button to toggle through the various channels until
AV2 appears on the screen.
5With the accessory device ON, press the PLAYbutton to acti-
vate the playback on the television.
AV2 INPUTS

M

uch like the AV2 jacks, the AV3jacks allow for extra accessory
device connections for items such as cameras or gaming stations.
The AV3 Input Jacks are located on the side of the TV.
1Connect the VIDEO (yellow) adaptercable to the VIDEO
AV3 injack on the left rear of the TV. Connect the otherend
of the VIDEO (yellow) cable to an RCAtype VIDEO Cable.
Connect that cable to the VDEO OUTjack on the back of the
accessory device being used. Note:An S-Video cable can be
used in place of the yellow Video cable if your device is equiped
with an S-Video Output. S-Video provides better video play-
back.
2Connect the AUDIO (red and white) adaptercable to an
RCAtype Audio Cable. Connect the other ends of the AUDIO
(red and white) cablesto the AUDIO (left and right) OUT
jacks on the rear of the accessory device being used.
3Turn the accessory device and the TVON.
4
Press the AV+ button and the number3 button on the
remote control to select the AV3 channel for the accessory
device. AV3 will appear in the upper left corner on the TV
screen when tuned properly. You can also press and hold the
AV+ button to toggle through the various channels until
AV3 appears on the screen.
5With the accessory device ON, press the PLAYbutton to acti-
vate the playback on the television.
AV3 (SIDE) INPUTS
VIDEOAUDIO
RIGHT LEFT S-VIDEO
4
3
2
1
3
AUDIO CABLES
(Left and Right)
VIDEOCABLE
ACCESSORYDEVICE
JACKPANEL
ACCESSORYDEVICE
(Camera., DVD, VCR, etc.)
4
2
1
1
OR
33
VIDEOAUDIO
RIGHT LEFT S-VIDEO
AUX/TV INPUT
PHONO INPUT
RL
1
2
ACCESSORYDEVICE
(Camera., DVD, VCR, etc.)
JACKPANEL
SIDEOF TV
AUDIO
CABLES
(Left and
Right)
S-VIDEOCABLE
ACCESSORYDEVICE
JACKPANEL
Audio System Connection:
AUDIOCABLES
(Red & White)
AUDIOSYSTEM
with AUDIO INPUTS
AV OUT
AUDIOL(eft) and R(ight)
JACKPANEL
BOTTOMOF TV
OR
AUDIOCABLES
VIDEOCABLE
ANS-VIDEO CABLE CAN
BEUSED IN PLACE OF THE
YELLOWVIDEO CABLE IF
DESIRED.