Bakeware

Bakeware

The bakeware material affects cooking results. Follow manufacturer’s recommendations and use the bakeware size recommended in the recipe. Use the following chart as a guide.

BAKEWARE/

RECOMMENDATIONS

RESULTS

 

 

 

Light colored

Use temperature and time

aluminum

recommended in recipe.

Light golden crusts

Even browning

Oven Door Vent

1 Oven Door VentBaking and Roasting

1. Oven door vent

Hot air and moisture escape from the oven door vent during certain oven modes. Some condensation may occur, however this will not affect cooking performance.

Dark aluminum and other bakeware with dark, dull and/or non-stick finish

Brown, crisp crusts

May need to reduce baking temperatures 25°F (15°C).

Use suggested baking time.

For pies, breads and casseroles, use temperature recommended in recipe.

Place rack in center of oven.

Baking and Roasting

ACCUBAKE® Temperature Management System

(on some models)

The ACCUBAKE system electronically regulates the oven heat levels during preheat and bake to maintain a precise temperature range for optimal cooking results. The bake and broil elements

Insulated cookie

Place in the bottom third of oven.

sheets or baking

May need to increase baking time.

pans

 

 

Little or no

 

 

 

bottom

 

 

 

browning

 

 

 

 

 

Stainless steel

May need to increase baking time.

Light, golden

 

 

 

crusts

 

 

Uneven

 

 

 

browning

 

 

 

 

 

Stoneware

Follow manufacturer’s instructions.

Crisp crusts

Ovenproof

May need to reduce baking

glassware,

temperatures 25°F (15°C).

ceramic glass or

 

ceramic

 

Brown, crisp

 

crusts

 

Meat Thermometer

On models without a temperature probe, always rely on a meat thermometer to determine doneness of meat and poultry. The internal temperature, not appearance, is what counts. A meat thermometer is not supplied with this appliance.

Insert the thermometer into the center of the thickest portion of the meat or inner thigh or breast of poultry. The tip of the thermometer should not touch fat, bone or gristle.

After reading the thermometer once, push it into the meat ¹⁄₂ in. (1.25 cm) more and read again. If the temperature drops, cook the meat or poultry longer.

Check all meat in two or three places.

cycle on and off in intervals. The bake element will glow red when cycling on, the broil element will not. This feature is automatically activated when the oven is in use.

Before baking and roasting, position racks according to the “Positioning Racks and Bakeware” section. When roasting, it is not necessary to wait for the oven preheat conditioning time to end before putting food in unless recommended in the recipe.

To Bake or Roast:

1.Press BAKE.

Press TEMP “up” or “down” arrow pads to set a temperature other than 350°F (177°C) in 5° amounts. The bake range can be set between 170°F and 500°F (77°C and 260°C).

2.Press START.

The temperature can be changed after this step. START does not need to be pressed again.

3.Press OFF when finished.

Preheating

After START is pressed, the oven will enter a timed preheat conditioning. “PrE” and the time countdown will appear on the display. When the preheat conditioning time ends, a tone will sound and the selected temperature will appear on the display.

Preheat temperatures are affected by varying factors such as room temperature and peak energy usage times. It is normal for the temperature showing on the display and the actual oven temperature to differ.

Waiting an additional 10 minutes after the preheat conditioning time ends to put food in the oven is suggested when baking foods with leavening ingredients, such as yeast, baking powder, baking soda and eggs.

12

Page 12
Image 12
Whirlpool RS610PXG Bakeware, Oven Door Vent, Baking and Roasting, Meat Thermometer, ACCUBAKE Temperature Management System