Whirlpool RS610PXG manual Troubleshooting, Nothing will operate, Cooktop will not operate

Models: RS610PXG

1 20
Download 20 pages 23.79 Kb
Page 18
Image 18
TROUBLESHOOTING

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

Is the power supply cord unplugged? Plug into a grounded outlet.

Has a household fuse been blown or has the circuit breaker been tripped?

Replace the fuse or reset the circuit.

Cooktop will not operate

Is the control knob set correctly? Push in knob before turning to a setting.

On ceramic glass models, is the “Cooktop Lockout” set? See “Cooktop Lockout” section.

On coil element models, is the element inserted properly? See “Coil Element and Burner Bowls” section.

Excessive heat around cookware on cooktop

Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than 1 in. (2.5 cm) outside the cooking area.

Hot surface indicator light stays on

Does the hot surface indicator light stay on after control knob(s) have been turned off?

See “Cooktop Controls” section.

Cooktop cooking results not what expected

Is the proper cookware being used? See “Cookware” section.

Is the control knob set to the proper heat level? See “Cooktop Controls” section.

Is the appliance level?

Level the appliance. See the Installation Instructions.

On coil element models, is the element inserted properly? See “Coil Element and Burner Bowls” section.

Oven will not operate

Is the electronic oven control set correctly? See “Electronic Oven Control” section.

Has a delay start been set? See “Timed Cooking” section.

On some models, is the Control Lock set? See “Control Lock” section.

Oven temperature too high or too low

Does the oven temperature calibration need adjustment? See “Oven Temperature Control” section.

On some models, does the cooling fan run during BAKE, BROIL or CLEAN?

It is normal for the fan to automatically run when the oven is in use. These helps cool the electronic control.

Display shows messages

Is the display showing “PF”?

There has been a power failure. Clear the display. See “Display(s)” section. On some models, reset the clock, if needed. See “Clock” section.

Is the display showing a letter followed by a number? Press OFF/CANCEL, OFF or CANCEL/OFF to clear the display. See “Display(s)” section. If it reappears, call for service. See “Assistance or Service” section.

Self-Cleaning cycle will not operate

Is the oven door open?

Close the oven door all the way.

Has the function been entered? See “Self-Cleaning Cycle” section.

On some models, has a delay start Self-Clean cycle been set?

See “Self-Cleaning Cycle” section.

Has a delay start been set? See “Timed Cooking” section.

Oven cooking results not what expected

Is the appliance level?

Level the appliance. See the Installation Instructions.

Is the proper temperature set? Double-check the recipe in a reliable cookbook.

Is the proper oven temperature calibration set? See “Oven Temperature Control” section.

Was the oven preheated?

See “Baking and Roasting” section.

Is the proper bakeware being used? See “Bakeware” section.

Are the racks positioned properly?

See “Positioning Racks and Bakeware” section.

Is there proper air circulation around bakeware? See “Positioning Racks and Bakeware” section.

Is the batter evenly distributed in the pan? Check to make sure batter is level in the pan.

Is the proper length of time being used? Adjust cooking time.

Has the oven door been opened while cooking?

Oven peeking releases oven heat and can result in longer cooking times.

Are baked items too brown on the bottom? Move rack to higher position in the oven.

Are pie crust edges browning early?

Use aluminum foil to cover the edge of the crust.

18

Page 18
Image 18
Whirlpool RS610PXG Troubleshooting, Nothing will operate, Cooktop will not operate, Hot surface indicator light stays on