Philips 190TW8 specifications OSD navigation, Adjusting the picture quality

OSD navigation

Many of the advanced settings and adjustments are available through using the OSD (onscreen display) menus, as shown in the example screenshot below.

Basic operations required to navigate these menus (Picture, Audio, Channel management and Settings) are described in this section.

Navigating the OSD with the remote control

Picture
Brightness		50
Contrast		60
Colour		30
Sharpness		80
Backlight		70
Colour Temp		Warm
Noise Reduction		Low
Move	Enter	Back

There are four main OSD menus. These are: Picture, Audio, Channel management and Settings. Use the following method to navigate these menus.

1

2

3

Press the MENU button on the remote control or the MENU button on the control panel.

Select your desired menu by using the up and down directional keys to switch between the four menus.

Use the directional keys to interact with the menu. The up / down directions will scroll through the menu options, while left/right will adjust the different settings (for example, in the Picture menu, settings such as brightness, contrast, etc.). Press MENU to exit.

Adjusting the OSD settings

The OSD can be used for adjusting the settings of your TV Monitor.

Press the MENU a key to open the OSD. You can use the OSD to adjust the picture quality, audio settings,channel settings and general settings. For advanced settings, please refer to following page:

Adjusting the picture quality

			1	Press the MENU key to bring up the OSD.
Picture			2	Using the directional keys, select Picture from the OSD. Then
Brightness		50
Contrast		60		navigate to the picture element you wish to adjust.
Colour		30
Sharpness		80
Backlight		70	3 Use the left or right keys to adjust the sliding scales.
Colour Temp		Warm
Noise Reduction		Low
			4 The Picture menu can be used to adjust the brightness, contrast,
Move	Enter	Back		colour, sharpness and other image-related qualities.

9