Change TV preferences
Use the preferences menu to customise your TV settings.
1Press 
MENU.
2Select [Setup] > [Installation] > [Preferences].
•[Location]: Optimises TV settings for your location - home or shop.
•[Volume bar]: Displays the volume bar when you adjust the volume.
•[Channel Information]: Displays information about the TV channel every time you switch channels. Select [Full] to view channel information or [Off] to turn off the channel information.
•[Universal access]: Enables or disables the universal access menu.
•[EasyLink]: Enables
•[Pixel Plus Link]: Overrides the settings of connected devices and uses the settings of the TV. (Available only when you activate Easylink).
•
3 Press | to select your preference. |
4Press OK.
5Press 
MENU to exit.
Access decoder channel
You can map channels provided through a decoder or descrambler to yourTV channel selection. In this way, you can select these channels by using the RC of yourTV.The decoder or a descrambler must be connected to EXT1 (SCART).
Set decoder channel
Map channels from a decoder or descrambler.
1Press 
MENU.
2Select [Setup] > [Installation] > [Decoder].
3Press 
to enter [Decoder] menu.
4Press 
to select [Channel], then press
to enter.
5Select one channel to map to the decoder / descrambler channel and press OK to confirm.
6Select [Status], then press 
to enter.
7Select [EXT 1] (SCART) the connector used by the decoder / descrambler.
8Press OK.
9Press 
MENU to exit.
Note
•Select [None] if you do not want to map to the decoder / descrambler channel.
English
EN 25
