Troubleshooting

Vertical flicker appears

Push the Auto button.

Eliminate the vertical bars using the Clock Adjustment of VIDEO NOISE in OSD Main Controls.

Horizontal flicker appears

Push the Auto button.

Eliminate the horizontal bars using the Phase

Adjustment of VIDEO NOISE in OSD Main

Controls.

The screen is too bright or too dark

An after-image appears

An after-image remains after the power has been turned off.

Green, red, blue, dark, and white dots remains

Adjust the contrast and brightness in OSD Main Controls. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.

If an image remains in the screen for an extended period of time, it may be imprinted in the screen and leave an after-image. This usually disappears after a few hours

This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The after-image will disappear after a set amount of time

The remaining dots are normal characteristic of the liquid crystal used in today’s technology.

For further assistance, refer to the Consumer Information Centers list to contact your local Philips

distributor.

RETURN TO TOP OF THE PAGE

file:///D/K1/english/200p3mg/safety/saf_troub.htm (2 of 2) [1/3/2003 3:34:53 PM]

Page 39
Image 39
Philips 200P3M user manual Vertical flicker appears, Horizontal flicker appears