IBM 59P5712 specs

Appendix B. Adapter operating environment and specifications

This appendix contains the IBM FAStT Host Adapter operating environment and specification information.

Environment	Minimum	Maximum
Operating temperature	0°C (32°F)	55°C (131°F)
Storage temperature	-20°C (-4°F)	70°C (158°F)
Relative humidity (noncondensing)	10%	90%
Storage humidity (noncondensing)	5%	95%

Type	Specification
Host bus	Conforms to PCI Local Bus Specification, revision 2.2
PCI signaling environment	3.3 V and 5.0 V buses supported
PCI transfer rate	264 MB per second maximum burst rate for 33 MHz operation
	(ISP2200A chip)
	Supports dual address bus cycles
Fibre Channel	Bus type: fibre optic media (shortwave 50 micron)
specifications	Bus transfer rate: 100 MB per second maximum (200
	full-duplex)
	Supports both FCP-SCSI and IP protocols
	Supports point-to-point fabric connection: F-Port Fabric Login
	Supports FCAL public loop profile: FL-Port Login
	Supports Fibre Channel services class 2 and 3
	FCP SCSI initiator and target operation
	Full-duplex operation
Processor	Single chip design that includes a RISC processor, Fibre Channel
	protocol manager, PCI DMA controller, and 1-gigabit transceivers
Host data transfer	64-bit, bus master DMA data transfers to 528 MB per second
RAM	128 KB of SRAM
BIOS ROM	128 KB of flash ROM in two 64 KB, software selectable banks.
	The flash is field programmable.
NVRAM	256 bytes, field programmable
Onboard DMA	Three independent DMA channels: two data and one command.
	Integrated 4 KB frame buffer FIFO for each data channel
Connectors (external)	SC-style connector that supports non-OFC, multimode fibre
	optic cabling using 1 x 9 fibre optic transceiver module
	Total cable length cannot exceed 500 meters
	Two three-position, point-to-point cable (internal)
Form factor	17.8 cm x 10.7 cm (7.0 in. x 4.2 in.)
Operating power	Less than 15 watts