In the Configuration menu, various settings and features of the TV can be adjusted.
∙ Switch On/OSD : In this sub
∙ Picture/Sound: In this
∙ Security: In this sub- menu, the Security settings of the TV can be configured.
∙ Control: In this sub
∙
In this sub menu the behavior of the TV after switching on and the behavior of the On Screen Display can be selected.
∙ Welcome Message: Press Cursor Left/Right to display the Welcome message entry menu:
o Welcome Message
o Line 1
o Line 2
o Clear
With the Cursor Up/Down buttons you can set the message characters.
∙ Switch On Channel: This item sets the television’s channel at switch on.
∙ Switch On Volume: This item sets the television’s volume at switch on. Use the Right/Left Cursor buttons on the Remote Control to adjust.
∙ Switch On Pic Fmt: This item sets the television’s Picture Format at switch on. Use the Right/Left Cursor buttons on the Remote Control to adjust.
∙Power On: The Power On menu function defines the behavior of the television whenever AC Power is applied. The valid states are "FORCED ON", "LAST STATUS" and “STANDBY”.
o When “FORCED ON”, the television can only be switched OFF by means of the main switch or a set- up remote control or by ESP function (Energy Saving Programmability controls the maximum continuous viewing time allowed by the control system).
o When “LAST STATUS”, the television switches on the previous status, ON or Stand- by. o When “STANDBY”, the television always switches on in Stand- by.
∙Volume Indicator: To display volume indicator when adjusting volume, select "YES". Select “NO” to hide the volume indicator.
∙Channel Display: Program Display values can be: Number, Label, All, None .
∙Digit Timeout: This is the time- out to enter the second digit of channel number (example: for channel number 10 and above).
∙3 Digit Entry: To allow for 3
-5 -
