HP 8000N, 8000DN manual Labels, Label Construction, Appendix a Specifications 265

Appendix A Specifications 265

Labels

Note For best results, use Tray 1 and the Left Output Bin.

CAUTION To avoid damaging the printer, use only labels recommended for use in laser printers.

Never print on the same sheet of labels more than once.

Label Construction

When selecting labels, consider the quality of each component:

zAdhesives: The adhesive material should be stable at 392° F (200° C), the

printer’s maximum temperature.

zArrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious

jams.

z Curl: Prior to printing, labels must lie flat with no more than 0.5 inch (13 millimeters) of curl in any direction.

zCondition: Do not use labels with wrinkles, bubbles, or other indications of

separation.

To print sheets of labels, see page 115.

Paper Specifications