Appendix A Specifications

267

Envelopes

Note

For best results, use the Left Output Bin.

Envelope Construction

Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components:

zWeight: See page 258 for supported envelope weight.

zConstruction: Prior to printing, envelopes should lie flat with less than 0.25 inch (6 mm) curl, and should not contain air. (Envelopes that trap air

may cause problems.)

z Condition: Make sure envelopes are not wrinkled, nicked, or otherwise damaged.

z Sizes in Tray 1: See page 256 for supported paper sizes.

z Sizes in the optional envelope feeder: From 3.5 by 6.3 inches (90 by 160 millimeters) to 7 by 10 inches (178 by 254 millimeters).

Continued on next page.

Paper Specifications

Page 267
Image 267
HP 8000N manual Envelopes, Envelope Construction, Appendix a Specifications 267, For best results, use the Left Output Bin