HP 8000N, 8000DN manual Problem Solving 175 Printer Messages

Chapter 5 Problem Solving		175
Printer Messages	(continued)
Message	Explanation or Recommended Action
RAM DISK FILE	Delete files and then try again, or turn the printer off, and then turn
SYSTEM IS FULL	the printer on to delete all files on the device. (Delete files using
	HP JetAdmin, HP FontSmart, or another software utility. See the
	software help for more information.)
	If the message persists, increase the size of the RAM disk. Change
	the RAM disk size from the Configuration Menu in the printer’s
	control panel (page 295).
STAPLER LOW	The stapler device is running out of staples and needs to be refilled.
ON STAPLES
TONER LOW	See page 139.
TRAY x EMPTY	Load the empty tray (x) to clear the message.
	If you do not load the specified tray, the printer will continue printing
	from the next available tray, and the message will continue to
	display.

Understanding Printer Messages