HP 8000DN, 8000N manual Determining Printer Problems

Chapter 5 Problem Solving 204

Problems with the Optional 5-bin Mailbox with Stapler (continued)

Printer does not	z Ensure that the Mailbox with Stapler has been configured in the
recognize the Mailbox	printer driver. Refer to page 52 for more information on accessing
with Stapler.	the printer driver.
	z Ensure that the cable from the Mailbox with Stapler is plugged into
	the printer parallel connector. If not, turn the printer off and plug
	the cable into the parallel connector, then turn the printer back on.
	See page 210 for cabling configurations.
	z Ensure that all bins are properly installed.
	z If the printer still does not recognize the Mailbox with Stapler,
	contact you dealer or authorized HP service provider.
Printer does not	z Check the cable between the printer and the stapler. Make
recognize stapler.	sure it is properly connected at both ends. See page 210 for
	cabling configurations.
The multibin mailbox will	z Verify that the power cord is firmly plugged into both the multibin
not power on.	mailbox and the power receptacle. Remove and reconnect the
	power cord.
	z Ensure that the cable from the Mailbox with Stapler is plugged into
	the printer parallel connector. If not, turn the printer off and plug
	the cable into the parallel connector, then turn the printer back on.
	See page 210 for cabling configurations.
	z Verify that the cables are firmly attached to the printer.

Determining Printer Problems