HP 8000N, 8000DN manual Situation Solution

Chapter 5 Problem Solving 203

Problems with the Optional 5-bin Mailbox with Stapler

Situation	Solution
The job was not stapled.	Jobs sent to the stapler might not be stapled for one or more
	of the following reasons:
	z The wrong size or type of paper was used for the job.
	z More than 20 pages were sent to the stapler, exceeding its
	capacity.
	z The stapler has bent or broken staples in the stapling bed. (See
	page 164.)
	z A staple jam was recently cleared (up to 12 following jobs might
	not be stapled).
	z The job was sent to a bin other than the stapler bin because the
	wrong size or type of paper was used for the job.
	z One-page jobs will not be stapled.
	z The interface cable between the mailbox and the stapler unit may
	be defective or not connected properly.
General repeated stapler	z Check to see that the job to be stapled is less than 2 mm thick.
jam problems.	z Stapler may have some trapped staple wires that are obstructing
	the magazine. Remove loose staples and paper dust from the
	inside of the stapler (page 164).

Determining Printer Problems