HP 8000N, 8000DN manual Problem Solving 173 Printer Messages

Chapter 5 Problem Solving		173
Printer Messages	(continued)
Message	Explanation or Recommended Action
MANUALLY FEED	Load the requested paper into Tray 1.
[TYPE] [SIZE]	Press GO if the desired paper is already loaded in Tray 1.
	Press - VALUE + to scroll through the available types and sizes. Press
	SELECT to accept the alternate type or size.
MEMORY FULL	There is no available memory in the printer. The current job might
STORED DATA LOST	not print correctly and some resources (such as downloaded fonts
	or macros) might have been deleted.
	You might want to add more memory to the printer (page 310).
MEMORY SETTINGS	The printer changed its memory settings because it did not have
CHANGED	enough memory to use the previous settings for I/O Buffering and
	Resource Saving. This usually occurs after removing memory from
	the printer, adding a duplexer, or adding a printer language.
	You might want to change memory settings for I/O Buffering and
	Resource Saving (although default settings are usually best) or add
	more memory to the printer (page 310).
MEMORY SHORTAGE	The printer did not have enough free memory to print the entire job.
JOB CLEARED	The remainder of the job will not print and will be cleared from
	memory.

Press GO to continue.

Change the Resource Saving setting from the printer’s control panel (page 279) or add more memory to the printer (page 310).

Understanding Printer Messages