HP 8000DN, 8000N manual Problem Solving 184 Printer Messages

Chapter 5 Problem Solving		184
Printer Messages	(continued)
Message	Explanation or Recommended Action
66.xy.zz INPUT	An error occurred in an external paper handling device.
DEVICE FAILURE	Turn the printer off, and then turn the printer on.
alternates with	If this message persists, contact an HP-authorized service or
CHECK CABLES	support provider. (See the HP Support pages at the front of this user
AND CYCLE POWER	guide.)
68 NVRAM ERROR	An error occurred in the printer’s nonvolatile memory (NVRAM) and
CHECK SETTINGS	one or more printer settings has been reset to its factory default.
	Print a configuration page and check the printer settings to
	determine which values have changed (page 228).
	Hold down CANCEL JOB while turning the printer on. This will clean up
	the NVRAM by removing old areas that are not being used.
	If this message persists, contact an HP-authorized service or
	support provider. (See the HP Support pages at the front of this user
	guide.)
68 NVRAM FULL	The printer’s nonvolatile memory (NVRAM) is full. Some settings
CHECK SETTINGS	might have been reset to the factory defaults.
	Print a configuration page and check the printer settings to

determine which values have changed (page 228).

If this message persists, contact an HP-authorized service or support provider. (See the HP Support pages at the front of this user guide.)

Understanding Printer Messages