HP 8000DN, 8000N manual Appendix B Control Panel Menus 298

Appendix B Control Panel Menus			298
Item	Values	Explanation
PCL MEMORY=	0K and up	This item appears only when RESOURCE SAVE=ON. Select
400K	(This value	the amount of memory used for saving PCL resources.
	depends on	Printer default is the minimum amount of memory needed
	the amount of	to perform resource saving for PCL. Press -VALUE+to
	installed	change settings by increments of 10 (up to 100 KB) or by
	memory.)	increments of 100 (above 100 KB).
		For more information, see page 316.
PS MEMORY=	0K and up	This item appears only when RESOURCE SAVE=ON. Select
400K	(This value	the amount of memory used for saving PS resources.
	depends on	Printer default is the minimum amount of memory needed
	the amount of	to perform resource saving for PS. Press -VALUE+to
	installed	change settings by increments of 10 (up to 100 KB) or by
	memory.)	increments of 100 (above 100 KB).
		For more information, see page 316.
PAGE PROTECT=	AUTO	This item appears only after a 21 PAGE TOO COMPLEX,
AUTO	ON	PRESS GO TO CONTINUE message displays (page 178).
		Memory Enhancement technology (MEt) attempts to
		guarantee that all pages will print. If the page does not
		print, turn PAGE PROTECT to ON. This might increase
		chances of a 20 INSUFFICIENT MEMORY, PRESS GO TO

CONTINUE message. If this occurs, simplify the print job or install additional memory (page 310).

Configuration Menu