Chapter 5 Problem Solving

232

PCL or PS Font List

Use the font lists to see which fonts are currently installed in the printer. (The font lists also show which fonts are resident on an optional hard disk or flash DIMM.)

To print a PCL or PS font list:

1. Press MENU repeatedly until INFORMATION MENU appears.

2. Press ITEM repeatedly until PRINT PCL FONT LIST or PRINT PS FONT LIST appears.

3. Press SELECT to print the font list.

The PS font list shows the PS fonts installed, and gives a sample of those fonts. The following describes the information that can be found on the PCL font list:

zFont gives the font names and samples.

zPitch/Point indicates the pitch or point size of the font.

z Escape Sequence (a PCL programming command) is used to select the designated font. (See the legend at the bottom of the font list page.)

Note

 

For step-by-step instructions on using printer commands to select a font

 

 

with DOS applications, see page 327.

 

 

 

 

Continued on next page.

Checking the Printer’s Configuration

Page 232
Image 232
HP 8000DN, 8000N manual PCL or PS Font List, Problem Solving 232