Chapter 5 Problem Solving

179

 

 

 

 

 

 

 

Printer Messages

(continued)

 

 

 

 

 

 

 

 

 

 

Message

Explanation or Recommended Action

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

22 PARALLEL I/O

Too much data was sent to the parallel port.

 

 

 

 

BUFFER OVERFLOW

Check for a loose cable connection and be sure to use a high-quality

 

 

 

 

 

 

 

 

 

 

 

 

alternates with

cable (page 41). (Some non-HP parallel cables might be missing pin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRESS GO TO

connections, or might otherwise not conform to the IEEE-1284

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTINUE

specification.)

 

 

 

 

 

This error can occur if the driver you are using is not IEEE-1284

 

 

 

 

 

 

 

 

 

 

compliant. For best results, use an HP driver that came with the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

printer (page 55).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press GO to clear the error message. (Data will be lost.)

 

 

 

 

 

If this message persists, contact an HP-authorized service or

 

 

 

 

 

support provider. (See the HP Support pages at the front of this user

 

 

 

 

 

guide.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

40 EIO x BAD

The connection has been broken between the printer and the EIO

 

 

 

 

 

 

 

 

 

 

 

 

TRANSMISSION

card in the specified slot.

 

 

 

 

alternates with

Press GO to clear the error message and continue printing.

 

 

 

 

PRESS GO TO

CONTINUE

Understanding Printer Messages

Page 179
Image 179
HP 8000N, 8000DN manual Problem Solving 179 Printer Messages