HP 8000DN, 8000N manual Appendix B Control Panel Menus 300

Appendix B Control Panel Menus			300
Item	Values	Explanation
RAM DISK=OFF	OFF	This item determines how the RAM disk is configured.
	ON	This item appears only if there is no optional hard disk
	AUTO	installed and the printer has at least 12 MB of memory.
		OFF: The RAM disk is disabled.
		ON: The RAM disk is enabled. Configure the amount of
		memory to be used through the following item: RAM DISK
		SIZE.
		Note
		If the setting is changed from OFF to ON or from OFF to
		AUTO, the printer will automatically reinitialize when it
		becomes idle.
RAM DISK	0K and up	This item determines the size of the RAM disk. This item
SIZE=xxxK	(This value	appears if RAM DISK=ON or AUTO.
	depends on	Press - VALUE + to change settings by increments of 100.
	the amount of	Note
	installed	This setting cannot be changed if RAM DISK=AUTO.
	memory.)	Changing this value will cause the printer to reinitialize
		when it becomes idle.

Configuration Menu