Manual TV channel search
Incertain cases the ’Automatic TV channel search’ may not be
ableto find all of the TV channels (e.g. coded TV channels). In
thatcase, use this manual method to set the channels.
aPressthe MENU buttonon the remote control. The main
menuwill appear.
bSelectthe line ’Installation’ with the Bor
Abuttonand confirm with the Cbutton.
cSelectthe line ’Manual store’ with the Bor
Abuttonand confirm with the Cbutton.
MANUAL STORE
Channel/Frequency FREQU.
Search 125
Fine tuning (,,,,,,n=,,,,,,$
Name edit xxx
Programme number 01
Decoder OFF
ã Exit:
« press MENU
dInthe line ’Channel/Frequency’, select the
displayfor:
’FREQU.’:frequency
’CCH’:channel
’SCH’:special channel
eIfyou know the frequency or channel of the desired TV
channel,you can enter the data in line ’Search’ with
thedigit buttons 0-9 .
DIfyou don’t know the frequency or channel of the TV
channelof your choice, press the Cbutton to start
thechannel search.
fInthe line ’Programme number’ select the
programmenumber you want e.g.: ’01’, using the Dor
Cbutton.
gIfyou want to change the TV channel name, press the
Cbuttonin line ’Name edit’.
ESelectthe character you want to change with the Dor
the Cbutton.Change the character with the Bor the
Abutton.Select the next character in the same way.
EToconfirm the information, press the OK button.
hIfyou want to change the automatic tv channel setting,
selectthe line ’Fine tuning’.
Withthe Dor Cbutton you can vary the automatic tv
channelsetting. Important: This re-tuning is only
necessaryand useful in special cases, e.g.: when there
arestripes on the picture with cable-TV systems.
iPressthe OK button to store the TV channel.
DIfyou want to search for further TV channels, start
againat step e.
jToend, press the MENU button.
Satellite receiver
Youcan receive channels from the satellite receiver via the
scartsocket EXT.1 .
Todo this, select the channel number ’E1’ with the qPr
button.You will have to select the channels to be received by
thesatellite receiver on the receiver itself.
6