Philips 14PV375/07, 21PV375/07, 14PV374/07 manual Manual recording

How can I set the counter to '0:00:00'?

You can set the counter to '0:00:00' with CLEAR .

When you put a cassette in the TV-Video Combi, the counter will automatically reset to '0:00:00'.

The counter does not move

This occurs when there are no recordings on a por- tion of a tape. This is not a fault in your TV-Video Combi.

The screen shows '-0:01:20'

If you rewind a cassette from the tape position '0:00:00', the counter will show for instance, '-0:01:20' (the cassette was rewound to 1 minute and 20 seconds before '0:00:00').

'-:--' is displayed in the 'REM' counter

This counter will automatically recognise the length of the tape. In addition, when you put in a cassette the TV-Video Combi must first calculate the time played. Therefore, '-:--' appears first and only after the tape has been running for a few seconds, the correct playing time will be shown.

Searching for a tape position with picture (scanning)

1.While a cassette is playing, press REW0- s

(reverse) or FWD 1- B (forward) one or more times.

2.Press PLAY B-Kto resume playback.

Still picture

1.During playback, press STILL 2 to stop the

tape and display a still picture.

2.To continue playback, press PLAY B-K .

Scanning and still motion interferes with the pic- ture quality. The sound is switched off. This is not a fault in your TV-Video Combi.

Searching for tape position without picture (forward wind and rewind)

1.Stop the tape with STOP C-L .

2.Press REW0- s (reverse) or FWD 1- B (forward).

3.To stop the tape, press STOP C-L .

Index search

Every time a tape is recorded, an index mark is written on the tape.

These marked positions can be found again quickly and easily later.

1.To search for the previous marking, press INDEX and then REW0- s .

2.For the next marking, press INDEX and then

FWD 1- B .

3.As soon as the TV-Video Combi finds this marking, it automatically switches to playback.

Manual Tracking

To adjust the tracking manually, press P+ or P- on the TV-Video Combi during playback.

Tracking returns to Automatic Tracking Adjustment when you press STOP C-Lor insert a tape.

6. Manual recording

General information

Use 'Manual Recording' to make a spontaneous recording (for example, a programme currently being shown).

If you want to start and stop a recording manually, read the section 'Recording without automatic switch-off'.

If you want to start a recording manually but have it stopped automatically, read the section 'Recording with automatic switch-off'. (e.g. not to record to the end of the tape)

Read the section 'Automatic recording from a satel- lite receiver', if you want a recording to be controlled automatically by a satellite receiver.

Recording without automatic switch-off

1.Insert a cassette.

2.Use PROG P+ PROG P– or 0..9 to select the programme number you want to record, for example, 'P01'.

3.To start recording, press	REC I	.
4.To stop recording, press			.
	STOP C-L

11

EN