2. Installation
2.4 Communication ports
Connection of RS232 or USB communication port (optional)
The RS232 and USB communication ports cannot operate simultaneously.
34
33
2
1
1 - Connect the RS232 (33) or USB (34) communication cable to the serial or USB port on the computer equipment.
2 - Connect the other end of the communication cable (33) or (34) to the USB
(1)or RS232 (2) communication port on the UPS.
The UPS can now communicate with MGE UPS SYSTEMS power management software.
Installation of the communication cards (optional)
|
| It is not necessary to shutdown the UPS |
4 | Communication card slot | before installing a communications card. |
(restricted access) |
|
1 - Remove the UPS cover (4) secured by screws.
2 - Insert the communications card in the slot. 3 - Put the UPS cover back in place using the screws.