Hans Grohe 28110XX1, 2810BXX1 Installation, Do not overtighten, or damage will result

Models: 28110XX1 2810BXX1

1 16

Page 4

Wrap both ends of the brass nipple with Teflon tape. Screw it into the mounting piece.

Screw the test nipple / mounting piece assembly into the drop-eared ell.

Tighten with a 12 mm Allen wrench (not included).

Seal the wall around the mounting piece with water- proof sealant.

Position the mounting plate over the mounting piece. Use a grease pencil or similar tool to mark the position of the screw holes.

Image 4

Contents

Wall Outlet Adapter with Hose Connection Raindance AllrounderInstallation Instructions / Warranty Technical Data Raindance Allrounder28110XX1 Determining the mounting heightRoughing in If you are not using the 28108XX1 wall outlet adapter, go to pageInstallation Do not overtighten, or damage will resultSeal the wall around the anchors with waterproof sealant Failure to seal the wall can lead to possible water damageInstall the handshower Replacement Parts Check Valve Maintenance Backflow prevenSeal the wall around the anchors with waterproof sealant Corner Mount KitFailure to seal the wall can lead to possible water damage Install the 28110XX1 Allrounder Do not drill through the mounting plateSeal the wall around the anchors with waterproof sealant Install the handshowerFailure to seal the wall can lead to possible water damage Using the Allrounder To adjust the handshower heightGuide the hose over the hose hook Pull or push the Allrounder to the desired positionLimescale Removal Raindance E 150 Air 3-Jet HandshowerChange the spray modes Replacement parts Cleaning Recommendation for Hansgrohe Products Limited Lifetime Consumer WarrantyCleaning Materials for Faucets and Showers Cleaning Instructions for Faucets and ShowersTHIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GA US - Installation Instructions Part No. 90661501 Revised 01/2008Tel. 770-360-9880 Fax