Install the 28110XX1 Allrounder | Hans Grohe 2810BXX1 guide

Install the 28110XX1 Allrounder

Install the 28110XX1 Allrounder

Do not drill through the mounting plate.

Place the mounting plate against the wall at the de- sired location. Mark the locations of the screw holes.

Put the mounting plate away in a safe location. Drill the holes, using a 6 mm bit.

Image 9

Hans Grohe 2810BXX1 installation instructions Install the 28110XX1 Allrounder, Do not drill through the mounting plate

Contents

Raindance Allrounder Wall Outlet Adapter with Hose ConnectionInstallation Instructions / Warranty Raindance Allrounder Technical Data28110XX1 Determining the mounting height If you are not using the 28108XX1 wall outlet adapter, go to page Roughing in Do not overtighten, or damage will result Installation Failure to seal the wall can lead to possible water damage Seal the wall around the anchors with waterproof sealant Install the handshower Check Valve Maintenance Backflow preven Replacement Parts Corner Mount Kit Do not drill through the mounting plate Install the 28110XX1 Allrounder Install the handshower To adjust the handshower height Using the AllrounderGuide the hose over the hose hook Pull or push the Allrounder to the desired position Raindance E 150 Air 3-Jet Handshower Limescale RemovalChange the spray modes Replacement parts Limited Lifetime Consumer Warranty Cleaning Recommendation for Hansgrohe ProductsCleaning Materials for Faucets and Showers Cleaning Instructions for Faucets and Showers THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR US - Installation Instructions Part No. 90661501 Revised 01/2008 Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GATel. 770-360-9880 Fax