If you are not using the 28108XX1 wall outlet adapter, go to page 9.

Install the Allrounder with the Optional Wall Outlet Adapter with Hose Connection 28108XX1

If you are not using the 28108XX1 wall outlet adapter, go to page 9.

Roughing in

Install a properly anchored 1/2" NPT drop-eared ell, at least 2" behind the surface of the finished wall. Install a test nipple in the ell.

When the finished wall is complete, mark the test nipple at the wall surface. Remove the test nipple.

Measure the test nipple to the mark.

Subtract 3/8" from this measurement. This is the length of the brass nipple required to install the wall outlet adapter.



Page 3
Image 3
Hans Grohe 2810BXX1, 28110XX1 Roughing in, If you are not using the 28108XX1 wall outlet adapter, go to page