Install the handshower

Attach the Allrounder to the mounting plate. Tighten the set screw.

Place a black rubber washer in one end of the hose. Screw this end to the wall outlet adapter.

Place the screen washer in the other end of the hose. Screw this end to the handshower.

Slide the handshower into the handshower holder. Guide the hose over the hose hook.

Image 6

Contents

Raindance Allrounder Wall Outlet Adapter with Hose ConnectionInstallation Instructions / Warranty 28110XX1 Technical DataRaindance Allrounder Determining the mounting height Roughing in If you are not using the 28108XX1 wall outlet adapter, go to page Installation Do not overtighten, or damage will result Seal the wall around the anchors with waterproof sealant Failure to seal the wall can lead to possible water damage Install the handshower Replacement Parts Check Valve Maintenance Backflow preven Corner Mount Kit Install the 28110XX1 Allrounder Do not drill through the mounting plate Install the handshower Guide the hose over the hose hook Using the AllrounderTo adjust the handshower height Pull or push the Allrounder to the desired position Raindance E 150 Air 3-Jet Handshower Limescale RemovalChange the spray modes Replacement parts Cleaning Materials for Faucets and Showers Cleaning Recommendation for Hansgrohe ProductsLimited Lifetime Consumer Warranty Cleaning Instructions for Faucets and Showers THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR US - Installation Instructions Part No. 90661501 Revised 01/2008 Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GATel. 770-360-9880 Fax