Viglen SX220 User Guide 28
Installing the Server Board Installing the server board consists of the following steps:
• Removing the cover, Riser cards and fan assembly.
• Mounting the server board in the chassis.
• Cabling the server board to the other chassis components.
• Adding processors and memory to the server board.
• Replacing riser cards, fan assembly and the top cover.
Removing the Cover
1. W hile pressing the blue latch button (A) with your left thumb, slide the t op cover
back using the heal of your right hand on the blue pad.
NOTE: A non-skid surface or a stop behind the chassis may be needed if attempting
to remove the top cover on a flat surface.
2. Set the cover aside and away from the immediate work area.
Figure 8: Removing the Cover
Removing the Riser Cards
1. Grasp riser card (A) at both ends (C) of the EMI shield.