Intel SX220 manual ESC Sequence, Hangup String

•Save: Allows you to save the configuration immediately.

•Close: Allows you to close the Emergency Management Port dialog without saving changes. If you have made changes, you will be prompted to save changes before closing.

Options

The Options menu has the following options:

•Clear EMP Password: Allows you to clear the currently saved EMP password. This takes effect immediately. This option is only available if the EMP password is set.

Help Topics

The Help Topics menu has the following options:

•Help Topics: Displays help information.

Enter New Password

Enter an EMP password. The valid range of characters includes ASCII values 32- 126.

The password must be from 1-16 characters long.

Verify New Password

Enter the same password as above.

ESC Sequence

The ESC Sequence string is sent to the modem before sending a command string to the modem. The length of the paging string is determined at run-time from firmware. You will be notified if the string is truncated. The string that has been saved is the one that will be shown in the edit box.

Hangup String

The Hangup Line string is sent to the modem whenever the EMP wants to terminate the session. The EMP automatically sends an <ENTER> character after this string. The length of the paging string is determined at run-time from firmware. You will be notified if the string is truncated. The string that has been saved is the one that will be shown in the edit box.

Viglen SX220 User Guide 93