Exit Menu

You can make the following selections on the Exit Menu. Select an option using the up or down arrow keys. Press <Enter> to run the option. Pressing <Esc> does not exit this menu. You must select one of the items from the menu or menu bar to exit.

Table 31: Exit Menu Features

Feature

Choices

Description

 

 

 

Exit Saving Changes

 

Exits and saves changes to CMOS.

Exit Discarding Changes

 

Exits without saving changes to CMOS. BIOS Setup

 

 

utility is exited and POST continues.

Load BIOS Setup Defaults

 

Loads factory default values for all BIOS Setup data.

Load Custom Defaults

 

Loads custom defaults saved from previous Custom

 

 

Save.

Save Custom Defaults

 

Saves new BIOS settings and stores them as custom

 

 

default values.

Discard Changes

 

Discards any changes made to BIOS settings and

 

 

restores previous settings.

Temporarily Changing the Boot Device Priority

During POST, you can change the boot device priority for the current boot process. The changes are not saved for the next boot process.

1.Boot the server.

2.At any time during POST, press <Esc>. When POST completes, a popup Boot menu displays.

3.Use the arrow keys to highlight the device you want the server system to boot from first. For example, if you want the server system to boot from the CD-ROM first, you select "CD-ROM Drive."

NOTE: One of the selections on the popup Boot menu is "Enter Setup.” Selecting this option brings you into the BIOS Setup. For more information about the BIOS Setup, see “Using BIOS Setup” on Page 59.

4.Press <Enter>.

5.The boot process continues. When finished, a system prompt displays.

Running the Adaptec SCSISelect Utility

Each host adapter includes an onboard SCSISelect configuration utility that allows you to configure/view the settings of the host adapter and devices in the server.

The system finds the Adaptec AIC-7899 SCSI host adapter and displays the message Adaptec AIC-7899 SCSI BIOS V x.xxx where x.xxx is the version number of the SCSISelect utility. Pressing <Ctrl+A> at this time allows you to configure the Adaptec AIC-7899 SCSI host adapter.

68

Viglen SX220 User Guide

Page 69
Image 69
Intel SX220 manual Exit Menu, Temporarily Changing the Boot Device Priority, Running the Adaptec SCSISelect Utility