Recovery Agent

If the BMC firmware remote update fails, the server will reboot into the service partition and the recovery agent will attempt to finish the update. The recovery agent is an executable file (recover.exe) that exists on the service partition.

Configuration Save/Restore Add-In

Clicking on the Configuration Save/Restore Add-in (CSR) allows you to save configuration information from various sources to a file. The CSR saves information from the following sources:

CMOS

ESCD

PCI records in non-volatile storage

Non-volatile emergency management port (EMP), platform event paging (PEP), and Platform event filtering (PEF) settings

Buttons

Save To File: Displays a file dialog so you can choose a filename and location. The CSR then tries to save any non-volatile configuration information it can to that file. Data is saved from all sources. There is no way to choose only certain pieces of configuration data to save. The CSR also saves the platform type, BIOS version and firmware version information in the file.

Restore From File: Displays a file dialog so you can choose a file containing configuration data to restore. The CSR then reads the platform identification string from the file and compares it to a string retrieved from the BIOS on the server. If the two do not match, an error message is displayed and the restore operation aborts. If they do match, the add-in restores the configuration data to the server. It prompts you to reboot the server for the new settings to take effect.

NOTE: BIOS passwords are stored in the file. Restoring a configuration can make passwords change on a server.

Close: Closes the CSR main window.

Help: Displays help information.

84

Viglen SX220 User Guide

Page 85
Image 85
Intel SX220 manual Recovery Agent