Intel SX220 manual Exiting the SSU

Modem Init String

The Modem Init String string is transmitted every time the EMP initialises. The length of the paging string is determined at run-time from firmware. You will be notified if the string is truncated. The string that has been saved is the one that will be shown in the edit box.

System Phone Number

Enter the system telephone number. This can be retrieved and reported via in-band management connections.

Access Mode

In Pre-boot Only the EMP is automatically activated when the system is powered- down or hard reset. In Always Active the EMP is active when the system is powered-down or hard reset. In Disabled the EMP powers-up deactivated and is not automatically activated by BIOS, power-down or hard resets.

Restricted Mode Access

When restricted mode is enabled control operations that could disable or alter a running system via the EMP are disabled.

Connection Mode

Direct connect mode is for applications that connect the port directly to another computer system, while Modem Mode is for applications where the port is connected to an external modem.

Buttons

•Save: Allows you to save the configuration immediately.

•Close: Allows you to close the Emergency Management Port dialog without saving changes. If you have made changes, you will be prompted to save changes before closing.

•Help: Displays help information.

Exiting the SSU

Exiting the SSU causes all windows to close.

1.Exit the SSU by opening the menu bar item File in the SSU Main window.

2.Click on Exit or Highlight Exit, and press <Enter>.

94 Viglen SX220 User Guide