Intel SX220 Running the Promise FastBuild Utility, Direct Platform Control DPC Console, Exit Menu

SCSI Disk Utilities

Press <Enter> to view the SCSI Disk Utilities Menu. This menu allows you to format hard disks and/or verify disk media.

When you are finished, press <Esc> and make your selection from the following menu:

Table 34: Exit Menu

Feature	Option	Comment
Exit Utility?	Yes	When you finish configuring your SCSI devices, press <Esc>. Then select
	No	Yes and press <Enter>. When this message appears:
		Please press any key to reboot
		Press any key, and the server reboots.

Running the Promise FastBuild Utility

This utility is only found on the SCB2 ATA model only.

The Promise ATA-100 host adapter is configured using the FastBuild†configuration utility that allows you to configure/view the settings of the host adapter and set RAID configurations.

When to Run the Promise FastBuild Utility

Use the FastBuild utility to:

•Define a RAID array

•Delete a RAID array

•Restore a RAID array

Running the Promise FastBuild Utility

1.When this message appears on the video monitor:

<<<Press <Ctrl><F> to enter FastBuild (TM) Utility>>>

2.Press <Ctrl+F> to run the utility.

Direct Platform Control (DPC) Console

Direct Platform Control (DPC) Console is part of Intel Server Control. Direct Platform Control is a server management application that supports remote system management via LAN, or an RS-232 serial connection to the server COM2 port over a modem or a direct serial cable. The Direct Platform Control Console provides the ability for remote management of Intel servers via modem or LAN with a capability to run DOS-based programs.

70 Viglen SX220 User Guide