Intel SX220 manual Security Menu Features, Limited, Minute

Wake on LAN	Disabled	Legacy wake only: Determines the action of the
	Enabled	system when a LAN wake up event occurs.
Wake on PME	Disabled	Legacy wake only: Determines the action of the
	Enabled	system when a PCI Power Management Enable wake
		up event occurs.
Wake on RTC Alarm	Disabled	Legacy wake only: Determines the action of the
	Enabled	system when a RTC Alarm Wake up event occurs.

Security Menu

You can make the following selections on the Security Menu itself. Enabling the Supervisor Password field requires a password for entering Setup. The passwords are not case-sensitive.

Table 21: Security Menu Features

Feature	Choices	Description
User Password is	Installed	Informational Only.
	Not Installed
Administrator Password is	Installed	Informational Only.
	Not Installed
Set Administrative	Press <Enter>	When the <Enter> key is pressed, a password prompt
Password		appears. Press ESC key to abort. Once set, this can
		be disabled by setting it to a null string or by clearing
		password jumper on server board.
Set User Password	Press <Enter>	When the <Enter> key is pressed, a password prompt
		appears. Press ESC key to abort. Once set, this can
		be disabled by setting it to a null string or by clearing
		password jumper on server board.
User Access Level	Limited	Sets the User access level for various BIOS setup
	No Access	functions.
	View Only
	Full
Password on Boot	Disabled	If your password is set and enabled, the system
	Enabled	prompts you for a password before it boots.
Secure Mode Timer	1 minute	Period of PS/2 keyboard and/or mouse inactivity
	2 minutes	specified for secure mode to activate. A password is
	5 minutes	required for secure mode to function. This option only
	10 minutes	appears on the screen after a “user” password has
	20 minutes	been entered.
	60 minutes
	120 minutes
Secure Mode Hot Key	Z	Key assigned to invoke secure mode features cannot
(CTRL-ALT- )	L	be enabled unless at least one password is set. This
		option only appears on the screen after a “user”
		password has been entered.
Secure Mode Boot	Disabled	System boots in secure mode. The user must enter a
	Enabled	password to unlock the system. This option only
		appears on the screen after a “user” password has
		been entered.
Video Blanking	Disabled	Blank video when secure mode is activated. A pass
	Enabled	word is required to unlock the system. This option only
		appears on the screen after a “user” password has
		been entered.
Power Switch Inhibit	Disabled	When enabled, the power switch is inoperable.
	Enabled	This option only appears on the screen after a “user”
		password has been entered.

64 Viglen SX220 User Guide