Warnings and Cautions!
These warnings and cautions apply whenever you remove the access cover to access components inside the server. Only a technically qualified person should integrate and configure the server.
Before removing the access cover for any reason, observe these safety guidelines.
•Turn off all peripheral devices connected to the server.
•Turn off the server by pressing the power button on the front of the chassis. Then unplug the AC power cord from the chassis or wall outlet.
•Label and disconnect all peripheral cables and all telecommunication lines connected to I/O connectors or ports on the back of the chassis.
•Provide some electrostatic discharge (ESD) protection by wearing an antistatic wrist strap attached to chassis
WARNING!
The power button on the front panel DOES NOT turn off the AC power. To remove power from server, you must unplug the AC power cord(s) from the wall outlet or the chassis.
WARNING!
Hazardous electrical conditions may be present on power, telephone, and communication cables. Turn off the server and disconnect the power cords, telecommunications systems, networks, and modems attached to the server before opening it. Otherwise, personal injury or equipment damage can result.
WARNING!
Do not open the power supply, as there is risk of electric shock and burns from high voltage and rapid overheating. Refer servicing of the power supply to qualified technical personnel.
Viglen SX220 User Guide | 27 |
