Viglen SX220 User Guide 53
Figure 36: Attaching the Rails
A. Inside rail
B. #6-32 x 3/16-inch screw
C. Attachment hole
D. Attachment tab
E. Attachment hole for cable m anager (available from others)
Attach Rail Brackets to Posts
1. Using two screws with washers (Figure 38, A), attach on e n ut b ar (B ) at the same
height on the inside of each rack post. Do not completely tighten the screws—
leave them loose enough to allow insertion of the brackets in the nex t step.
2. Insert the slotted foot of a rail bracket between each nut bar and post.
3. Align the f ace of the bracket foot with th e inside edge of the rack post and f irmly
tighten the screws.
Figure 37: Attaching Rail Brackets to Post
A. #10-32 x ½-inch screw with was her
B. Nut bar
C. Washer